DynaPowerUSA

700W

700W

Showing all 3 results

  • R4B-700G1V2

    Features

    • 700W
    • High Efficiency Mini Redundant Power Supply
    • Dimensions: 7.83″ x 5.9″ x 3.38″
    • Dimensions(mm): 199 x 150  x 86
    • ATX 12V / EPS 12V
    • Cooling by forced air 2x40mm Fan (Each module)
    • PS/2 Size design
    • Hot-Swappable & Power Sharing capability
  • R2A-700D1V2

    Features

    • 700W
    • High Efficiency 2U Redundant Power Supply
    • High Efficiency: 80% Typical at full load
    • Dimensions: 10.43″ x 3.98″ x 3.3″
    • Dimensions(mm): 265 x 101 x 84
    • Hot-swappable/Hot-pluggable
  • 2U Power Supply 700W SS-2U70EL

    SS-2U70EL

    Features

    • ATX 12V / EPS 12V
    • POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms.
    • OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
    • OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
    • SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the Power Supply shall shutdown.
    • EMI: FCC CLASS B, CISPR22 CLASS B.
    • AGENCY APPROVALS: TO MEET UL, CUL, TUV.
    • MTBF OF Power Supply ELECTRONNIS: 100,000 hours.