DynaPowerUSA

600W

600W

Showing all 4 results

  • R4B-600G1V2

    Features

    • 600W
    • High Efficiency Mini Redundant Power Supply
    • Dimensions: 7.83″ x 5.9″ x 3.38″
    • Dimensions(mm): 199 x 150  x 86
    • Cooling by forced air 2x40mm Fan (Each module)
    • PS/2 Size design
    • Hot-Swappable & Power Sharing capability
    • ATX 12V / EPS 12V
  • R2A-600D1V2

    Features

    • 600W
    • High Efficiency 2U Redundant Power Supply
    • High Efficiency: 80% Typical at full load
    • Dimensions: 10.43″ x 3.98″ x 3.3″
    • Dimensions(mm): 265 x 101 x 84
    • Operation Temperature: 0°C to +45°C
  • 2U Power Supply 600W SS-2U60EL

    SS-2U60EL

    Features

    • ATX 12V / EPS 12V
    • POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms.
    • OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
    • OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
    • SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the Power Supply shall shutdown.
    • EMI: FCC CLASS B, CISPR22 CLASS B.
    • AGENCY APPROVALS: TO MEET UL, CUL, TUV.
    • MTBF OF Power Supply ELECTRONNIS: 100,000 hours.
  • 1U Power Supply 80Plus 600W SS-1U60EL

    SS-1U60EL

    Features

    • 600W
    • Dimensions(mm): 225 X 100 X 40.5
    • Cooling: One 40 mm DC Fan.
    • Temperature Range: Operation 0℃~45℃
    • Hold Up Time: 16ms at maximum load & normal input voltage
    • Efficiency: Typical >80% at 115VAC, Full Load.
    • ATX 12V / EPS 12V