DynaPowerUSA

500W

500W

Showing all 3 results

  • R4S-500G1V2

    Features

    • Safety Approval
    • Meet CE Rohs 2.0 2011/65/EU
    • Meet REACH
    • Operation Temp.: 0°C~50°C
    • Altitude during operation: Up to 5000m
    • High Efficiency
    • Low Noise
  • R2A-500D1V2

    Features

    • 500W
    • High Efficiency 2U Redundant Power Supply
    • High Efficiency: 80% Typical at full load
    • Dimensions: 10.43 x 3.98″ x 3.3″
    • Dimensions(mm): 265 x 101 x 84
    • Full Range AC Input
  • 2U Power Supply 500W SS-2U50ES

    SS-2U50ES

    Features

    • ATX 12V / EPS 12V
    • POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms.
    • OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
    • OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
    • SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the Power Supply shall shutdown.
    • EMI: FCC CLASS B, CISPR22 CLASS B.
    • AGENCY APPROVALS: TO MEET UL, CUL, TUV.
    • MTBF OF Power Supply ELECTRONNIS: 100,000 hours